by Sudarsan

A bit of elbow grease will solve many problems that suggest your furnace might have problems. There are a few signs that it might be! However, hiring a professional furnace repair service is the quickest approach to fixing your furnace without causing further damage. But in the meantime, is your furnace acting up, and are you unsure what to do? Take these simple measures to solve the issue and heat your house.

Examine Your Thermostat.

Verify that the “heat” setting on your thermostat is active. Next, adjust the thermostat to five degrees warmer than the room’s current temperature. The furnace should sound like it’s on practically right away. If the display stays blank and the furnace doesn’t come on, try changing the batteries in your thermostat to see if it solves the problem. When the thermostat appears to be functioning correctly, but the furnace is still not turning on, it’s necessary to check the power.

Check The Power

Your furnace might have blown a fuse or circuit breaker. Like your microwave and refrigerator, your heater also requires electricity. Indeed, this also applies to furnaces that run on natural gas. Your gas furnace requires electricity to run the blower motor and to communicate with your thermostat.

Furthermore, for safety purposes, many furnaces are designed to shut down automatically when the electricity goes out. If every light and outlet in your house is still operational, there are a few more potential problems that you can check.

Visit The Furnace Room.

Go to your furnace room and verify the final few potential issues that can be real troublemakers before arranging a repair:

  • Turn off the furnace switch. Verify that the furnace shut-off switch, which is situated on or next to your furnace, is turned off.
  • Check the furnace filter. If the furnace air filter is older than a month, replace it. A filthy or clogged filter is one of the most common causes of furnace malfunctions and even furnace shutdowns.
  • Check the blower motor. Verify that the blower motor-covering front panel is firmly closed and fixed. The furnace’s lower cabinet contains the blower motor.
  • Inspect the pilot light. Check your pilot light and ensure the gas handle is in the “open” or “on” position, allowing gas to flow to the furnace to confirm that the gas is on.
  • Check the external vents. Ensure there is no blocked airflow and that the vent, which may vent out the side of your home, is free of snow, ice, and debris.

Call A Repair Technician.

Finally, it’s time to schedule a Furnace Repair Calgary when all other options have been exhausted. A qualified repair specialist will be able to reach any condensed tube and any rusted connections. Additionally, they can look for more serious issues like damaged belts and motors. If your furnace is older, you may incur more for repairs.

You may also like